# &>>(_:_:)

Returns the result of shifting a value’s binary representation the specified number of digits to the right, masking the shift amount to the type’s bit width.

Available because

`Self`

conforms to`FixedWidthInteger`

.

`static func &>> <Other>(lhs: Self, rhs: Other) -> Self where Other : BinaryInteger`

## Parameters

- lhs
The value to shift.

- rhs
The number of bits to shift

`lhs`

to the right. If`rhs`

is outside the range`0..<lhs.bitWidth`

, it is masked to produce a value within that range.

## Overview

Use the masking right shift operator (`&>>`

) when you need to perform a shift and are sure that the shift amount is in the range `0..<lhs.bitWidth`

. Before shifting, the masking right shift operator masks the shift to this range. The shift is performed using this masked value.

The following example defines `x`

as an instance of `UInt8`

, an 8-bit, unsigned integer type. If you use `2`

as the right-hand-side value in an operation on `x`

, the shift amount requires no masking.

```
let x: UInt8 = 30 // 0b00011110
let y = x &>> 2
// y == 7 // 0b00000111
```

However, if you use `8`

as the shift amount, the method first masks the shift amount to zero, and then performs the shift, resulting in no change to the original value.

```
let z = x &>> 8
// z == 30 // 0b00011110
```

If the bit width of the shifted integer type is a power of two, masking is performed using a bitmask; otherwise, masking is performed using a modulo operation.