jointGetSolverPriority(joint:)

Other members in extension

Types

• enum AreaBodyStatus
• enum AreaParameter
• enum AreaSpaceOverrideMode
• enum BodyAxis
• enum BodyDampMode
• enum BodyMode
• enum BodyParameter
• enum BodyState
• enum ConeTwistJointParam
• enum G6DOFJointAxisFlag
• enum G6DOFJointAxisParam
• enum HingeJointFlag
• enum HingeJointParam
• enum JointType
• enum PinJointParam
• enum ProcessInfo
• enum ShapeType
• enum SliderJointParam
• enum SpaceParameter

Type members

• static var shared: PhysicsServer3D

  The shared instance of this class

• static func areaAddShape(area: RID, shape: RID, transform: Transform3D, disabled: Bool)

  Adds a shape to the area, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index.

• static func areaAttachObjectInstanceId(area: RID, id: UInt)

  Assigns the area to a descendant of Object, so it can exist in the node tree.

• static func areaClearShapes(area: RID)

  Removes all shapes from an area. It does not delete the shapes, so they can be reassigned later.

• static func areaCreate() -> RID

  Creates an Area3D.

• static func areaGetCollisionLayer(area: RID) -> UInt32

  Returns the physics layer or layers an area belongs to.

• static func areaGetCollisionMask(area: RID) -> UInt32

  Returns the physics layer or layers an area can contact with.

• static func areaGetObjectInstanceId(area: RID) -> UInt

  Gets the instance ID of the object the area is assigned to.

• static func areaGetParam(area: RID, param: PhysicsServer3D.AreaParameter) -> Variant

  Returns an area parameter value. A list of available parameters is on the AreaParameter constants.

• static func areaGetShape(area: RID, shapeIdx: Int32) -> RID

  Returns the RID of the nth shape of an area.

• static func areaGetShapeCount(area: RID) -> Int32

  Returns the number of shapes assigned to an area.

• static func areaGetShapeTransform(area: RID, shapeIdx: Int32) -> Transform3D

  Returns the transform matrix of a shape within an area.

• static func areaGetSpace(area: RID) -> RID

  Returns the space assigned to the area.

• static func areaGetTransform(area: RID) -> Transform3D

  Returns the transform matrix for an area.

• static func areaRemoveShape(area: RID, shapeIdx: Int32)

  Removes a shape from an area. It does not delete the shape, so it can be reassigned later.

• static func areaSetAreaMonitorCallback(area: RID, callback: Callable)

  Sets the area’s area monitor callback. This callback will be called when any other (shape of an) area enters or exits (a shape of) the given area, and must take the following five parameters:

• static func areaSetCollisionLayer(area: RID, layer: UInt32)

  Assigns the area to one or many physics layers.

• static func areaSetCollisionMask(area: RID, mask: UInt32)

  Sets which physics layers the area will monitor.

• static func areaSetMonitorCallback(area: RID, callback: Callable)

  Sets the area’s body monitor callback. This callback will be called when any other (shape of a) body enters or exits (a shape of) the given area, and must take the following five parameters:

• static func areaSetMonitorable(area: RID, monitorable: Bool)
• static func areaSetParam(area: RID, param: PhysicsServer3D.AreaParameter, value: Variant)

  Sets the value for an area parameter. A list of available parameters is on the AreaParameter constants.

• static func areaSetRayPickable(area: RID, enable: Bool)

  Sets object pickable with rays.

• static func areaSetShape(area: RID, shapeIdx: Int32, shape: RID)

  Substitutes a given area shape by another. The old shape is selected by its index, the new one by its RID.

• static func areaSetShapeDisabled(area: RID, shapeIdx: Int32, disabled: Bool)
• static func areaSetShapeTransform(area: RID, shapeIdx: Int32, transform: Transform3D)

  Sets the transform matrix for an area shape.

• static func areaSetSpace(area: RID, space: RID)

  Assigns a space to the area.

• static func areaSetTransform(area: RID, transform: Transform3D)

  Sets the transform matrix for an area.

• static func bodyAddCollisionException(body: RID, exceptedBody: RID)

  Adds a body to the list of bodies exempt from collisions.

• static func bodyAddConstantCentralForce(body: RID, force: Vector3)

  Adds a constant directional force without affecting rotation that keeps being applied over time until cleared with body_set_constant_force(body, Vector3(0, 0, 0)).

• static func bodyAddConstantForce(body: RID, force: Vector3, position: Vector3)

  Adds a constant positioned force to the body that keeps being applied over time until cleared with body_set_constant_force(body, Vector3(0, 0, 0)).

• static func bodyAddConstantTorque(body: RID, torque: Vector3)

  Adds a constant rotational force without affecting position that keeps being applied over time until cleared with body_set_constant_torque(body, Vector3(0, 0, 0)).

• static func bodyAddShape(body: RID, shape: RID, transform: Transform3D, disabled: Bool)

  Adds a shape to the body, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index.

• static func bodyApplyCentralForce(body: RID, force: Vector3)

  Applies a directional force without affecting rotation. A force is time dependent and meant to be applied every physics update.

• static func bodyApplyCentralImpulse(body: RID, impulse: Vector3)

  Applies a directional impulse without affecting rotation.

• static func bodyApplyForce(body: RID, force: Vector3, position: Vector3)

  Applies a positioned force to the body. A force is time dependent and meant to be applied every physics update.

• static func bodyApplyImpulse(body: RID, impulse: Vector3, position: Vector3)

  Applies a positioned impulse to the body.

• static func bodyApplyTorque(body: RID, torque: Vector3)

  Applies a rotational force without affecting position. A force is time dependent and meant to be applied every physics update.

• static func bodyApplyTorqueImpulse(body: RID, impulse: Vector3)

  Applies a rotational impulse to the body without affecting the position.

• static func bodyAttachObjectInstanceId(body: RID, id: UInt)

  Assigns the area to a descendant of Object, so it can exist in the node tree.

• static func bodyClearShapes(body: RID)

  Removes all shapes from a body.

• static func bodyCreate() -> RID
• static func bodyGetCollisionLayer(body: RID) -> UInt32

  Returns the physics layer or layers a body belongs to.

• static func bodyGetCollisionMask(body: RID) -> UInt32

  Returns the physics layer or layers a body can collide with.

• static func bodyGetCollisionPriority(body: RID) -> Double

  Returns the body’s collision priority.

• static func bodyGetConstantForce(body: RID) -> Vector3

  Returns the body’s total constant positional forces applied during each physics update.

• static func bodyGetConstantTorque(body: RID) -> Vector3

  Returns the body’s total constant rotational forces applied during each physics update.

• static func bodyGetDirectState(body: RID) -> PhysicsDirectBodyState3D?

  Returns the PhysicsDirectBodyState3D of the body. Returns null if the body is destroyed or removed from the physics space.

• static func bodyGetMaxContactsReported(body: RID) -> Int32

  Returns the maximum contacts that can be reported. See bodySetMaxContactsReported(body:amount:).

• static func bodyGetMode(body: RID) -> PhysicsServer3D.BodyMode

  Returns the body mode.

• static func bodyGetObjectInstanceId(body: RID) -> UInt

  Gets the instance ID of the object the area is assigned to.

• static func bodyGetParam(body: RID, param: PhysicsServer3D.BodyParameter) -> Variant

  Returns the value of a body parameter. A list of available parameters is on the BodyParameter constants.

• static func bodyGetShape(body: RID, shapeIdx: Int32) -> RID

  Returns the RID of the nth shape of a body.

• static func bodyGetShapeCount(body: RID) -> Int32

  Returns the number of shapes assigned to a body.

• static func bodyGetShapeTransform(body: RID, shapeIdx: Int32) -> Transform3D

  Returns the transform matrix of a body shape.

• static func bodyGetSpace(body: RID) -> RID

  Returns the RID of the space assigned to a body.

• static func bodyGetState(body: RID, state: PhysicsServer3D.BodyState) -> Variant

  Returns a body state.

• static func bodyIsAxisLocked(body: RID, axis: PhysicsServer3D.BodyAxis) -> Bool
• static func bodyIsContinuousCollisionDetectionEnabled(body: RID) -> Bool

  If true, the continuous collision detection mode is enabled.

• static func bodyIsOmittingForceIntegration(body: RID) -> Bool

  Returns whether a body uses a callback function to calculate its own physics (see bodySetForceIntegrationCallback(body:callable:userdata:)).

• static func bodyRemoveCollisionException(body: RID, exceptedBody: RID)

  Removes a body from the list of bodies exempt from collisions.

• static func bodyRemoveShape(body: RID, shapeIdx: Int32)

  Removes a shape from a body. The shape is not deleted, so it can be reused afterwards.

• static func bodyResetMassProperties(body: RID)

  Restores the default inertia and center of mass based on shapes to cancel any custom values previously set using bodySetParam(body:param:value:).

• static func bodySetAxisLock(body: RID, axis: PhysicsServer3D.BodyAxis, lock: Bool)
• static func bodySetAxisVelocity(body: RID, axisVelocity: Vector3)

  Sets an axis velocity. The velocity in the given vector axis will be set as the given vector length. This is useful for jumping behavior.

• static func bodySetCollisionLayer(body: RID, layer: UInt32)

  Sets the physics layer or layers a body belongs to.

• static func bodySetCollisionMask(body: RID, mask: UInt32)

  Sets the physics layer or layers a body can collide with.

• static func bodySetCollisionPriority(body: RID, priority: Double)

  Sets the body’s collision priority.

• static func bodySetConstantForce(body: RID, force: Vector3)

  Sets the body’s total constant positional forces applied during each physics update.

• static func bodySetConstantTorque(body: RID, torque: Vector3)

  Sets the body’s total constant rotational forces applied during each physics update.

• static func bodySetEnableContinuousCollisionDetection(body: RID, enable: Bool)

  If true, the continuous collision detection mode is enabled.

• static func bodySetForceIntegrationCallback(body: RID, callable: Callable, userdata: Variant)

  Sets the function used to calculate physics for an object, if that object allows it (see bodySetOmitForceIntegration(body:enable:)). The force integration function takes 2 arguments:

• static func bodySetMaxContactsReported(body: RID, amount: Int32)

  Sets the maximum contacts to report. Bodies can keep a log of the contacts with other bodies. This is enabled by setting the maximum number of contacts reported to a number greater than 0.

• static func bodySetMode(body: RID, mode: PhysicsServer3D.BodyMode)

  Sets the body mode, from one of the BodyMode constants.

• static func bodySetOmitForceIntegration(body: RID, enable: Bool)

  Sets whether a body uses a callback function to calculate its own physics (see bodySetForceIntegrationCallback(body:callable:userdata:)).

• static func bodySetParam(body: RID, param: PhysicsServer3D.BodyParameter, value: Variant)

  Sets a body parameter. A list of available parameters is on the BodyParameter constants.

• static func bodySetRayPickable(body: RID, enable: Bool)

  Sets the body pickable with rays if enable is set.

• static func bodySetShape(body: RID, shapeIdx: Int32, shape: RID)

  Substitutes a given body shape by another. The old shape is selected by its index, the new one by its RID.

• static func bodySetShapeDisabled(body: RID, shapeIdx: Int32, disabled: Bool)
• static func bodySetShapeTransform(body: RID, shapeIdx: Int32, transform: Transform3D)

  Sets the transform matrix for a body shape.

• static func bodySetSpace(body: RID, space: RID)

  Assigns a space to the body (see spaceCreate).

• static func bodySetState(body: RID, state: PhysicsServer3D.BodyState, value: Variant)

  Sets a body state (see BodyState constants).

• static func bodyTestMotion(body: RID, parameters: PhysicsTestMotionParameters3D?, result: PhysicsTestMotionResult3D?) -> Bool

  Returns true if a collision would result from moving along a motion vector from a given point in space. PhysicsTestMotionParameters3D is passed to set motion parameters. PhysicsTestMotionResult3D can be passed to return additional information.

• static func boxShapeCreate() -> RID
• static func capsuleShapeCreate() -> RID
• static func concavePolygonShapeCreate() -> RID
• static func coneTwistJointGetParam(joint: RID, param: PhysicsServer3D.ConeTwistJointParam) -> Double

  Gets a cone_twist_joint parameter (see ConeTwistJointParam constants).

• static func coneTwistJointSetParam(joint: RID, param: PhysicsServer3D.ConeTwistJointParam, value: Double)

  Sets a cone_twist_joint parameter (see ConeTwistJointParam constants).

• static func convexPolygonShapeCreate() -> RID
• static func customShapeCreate() -> RID
• static func cylinderShapeCreate() -> RID
• static func freeRid(RID)

  Destroys any of the objects created by PhysicsServer3D. If the RID passed is not one of the objects that can be created by PhysicsServer3D, an error will be sent to the console.

• static func generic6dofJointGetFlag(joint: RID, axis: Vector3.Axis, flag: PhysicsServer3D.G6DOFJointAxisFlag) -> Bool

  Gets a generic_6_DOF_joint flag (see G6DOFJointAxisFlag constants).

• static func generic6dofJointGetParam(joint: RID, axis: Vector3.Axis, param: PhysicsServer3D.G6DOFJointAxisParam) -> Double

  Gets a generic_6_DOF_joint parameter (see G6DOFJointAxisParam constants).

• static func generic6dofJointSetFlag(joint: RID, axis: Vector3.Axis, flag: PhysicsServer3D.G6DOFJointAxisFlag, enable: Bool)

  Sets a generic_6_DOF_joint flag (see G6DOFJointAxisFlag constants).

• static func generic6dofJointSetParam(joint: RID, axis: Vector3.Axis, param: PhysicsServer3D.G6DOFJointAxisParam, value: Double)

  Sets a generic_6_DOF_joint parameter (see G6DOFJointAxisParam constants).

• static func getProcessInfo(PhysicsServer3D.ProcessInfo) -> Int32

  Returns information about the current state of the 3D physics engine. See ProcessInfo for a list of available states.

• static func heightmapShapeCreate() -> RID
• static func hingeJointGetFlag(joint: RID, flag: PhysicsServer3D.HingeJointFlag) -> Bool

  Gets a hinge_joint flag (see HingeJointFlag constants).

• static func hingeJointGetParam(joint: RID, param: PhysicsServer3D.HingeJointParam) -> Double

  Gets a hinge_joint parameter (see HingeJointParam).

• static func hingeJointSetFlag(joint: RID, flag: PhysicsServer3D.HingeJointFlag, enabled: Bool)

  Sets a hinge_joint flag (see HingeJointFlag constants).

• static func hingeJointSetParam(joint: RID, param: PhysicsServer3D.HingeJointParam, value: Double)

  Sets a hinge_joint parameter (see HingeJointParam constants).

• static func jointClear(joint: RID)
• static func jointCreate() -> RID
• static func jointDisableCollisionsBetweenBodies(joint: RID, disable: Bool)

  Sets whether the bodies attached to the Joint3D will collide with each other.

• static func jointGetType(joint: RID) -> PhysicsServer3D.JointType

  Returns the type of the Joint3D.

• static func jointIsDisabledCollisionsBetweenBodies(joint: RID) -> Bool

  Returns whether the bodies attached to the Joint3D will collide with each other.

• static func jointMakeConeTwist(joint: RID, bodyA: RID, localRefA: Transform3D, bodyB: RID, localRefB: Transform3D)
• static func jointMakeGeneric6dof(joint: RID, bodyA: RID, localRefA: Transform3D, bodyB: RID, localRefB: Transform3D)
• static func jointMakeHinge(joint: RID, bodyA: RID, hingeA: Transform3D, bodyB: RID, hingeB: Transform3D)
• static func jointMakePin(joint: RID, bodyA: RID, localA: Vector3, bodyB: RID, localB: Vector3)
• static func jointMakeSlider(joint: RID, bodyA: RID, localRefA: Transform3D, bodyB: RID, localRefB: Transform3D)
• static func jointSetSolverPriority(joint: RID, priority: Int32)

  Sets the priority value of the Joint3D.

• static func pinJointGetLocalA(joint: RID) -> Vector3

  Returns position of the joint in the local space of body a of the joint.

• static func pinJointGetLocalB(joint: RID) -> Vector3

  Returns position of the joint in the local space of body b of the joint.

• static func pinJointGetParam(joint: RID, param: PhysicsServer3D.PinJointParam) -> Double

  Gets a pin_joint parameter (see PinJointParam constants).

• static func pinJointSetLocalA(joint: RID, localA: Vector3)

  Sets position of the joint in the local space of body a of the joint.

• static func pinJointSetLocalB(joint: RID, localB: Vector3)

  Sets position of the joint in the local space of body b of the joint.

• static func pinJointSetParam(joint: RID, param: PhysicsServer3D.PinJointParam, value: Double)

  Sets a pin_joint parameter (see PinJointParam constants).

• static func separationRayShapeCreate() -> RID
• static func setActive(Bool)

  Activates or deactivates the 3D physics engine.

• static func shapeGetData(shape: RID) -> Variant

  Returns the shape data.

• static func shapeGetType(shape: RID) -> PhysicsServer3D.ShapeType

  Returns the type of shape (see ShapeType constants).

• static func shapeSetData(shape: RID, data: Variant)

  Sets the shape data that defines its shape and size. The data to be passed depends on the kind of shape created shapeGetType(shape:).

• static func sliderJointGetParam(joint: RID, param: PhysicsServer3D.SliderJointParam) -> Double

  Gets a slider_joint parameter (see SliderJointParam constants).

• static func sliderJointSetParam(joint: RID, param: PhysicsServer3D.SliderJointParam, value: Double)

  Gets a slider_joint parameter (see SliderJointParam constants).

• static func softBodyGetBounds(body: RID) -> AABB
• static func spaceCreate() -> RID

  Creates a space. A space is a collection of parameters for the physics engine that can be assigned to an area or a body. It can be assigned to an area with areaSetSpace(area:space:), or to a body with bodySetSpace(body:space:).

• static func spaceGetDirectState(space: RID) -> PhysicsDirectSpaceState3D?

  Returns the state of a space, a PhysicsDirectSpaceState3D. This object can be used to make collision/intersection queries.

• static func spaceGetParam(space: RID, param: PhysicsServer3D.SpaceParameter) -> Double

  Returns the value of a space parameter.

• static func spaceIsActive(space: RID) -> Bool

  Returns whether the space is active.

• static func spaceSetActive(space: RID, active: Bool)

  Marks a space as active. It will not have an effect, unless it is assigned to an area or body.

• static func spaceSetParam(space: RID, param: PhysicsServer3D.SpaceParameter, value: Double)

  Sets the value for a space parameter. A list of available parameters is on the SpaceParameter constants.

• static func sphereShapeCreate() -> RID
• static func worldBoundaryShapeCreate() -> RID
• class var godotClassName: StringName